Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Super Duplex Steel S32750 Nipple, which has good weldability and post heat treatment of weld areas not required. Being a two – phase material (austenitic – ferritic) Super Duplex S32750 Hexagon Reducing Nipple will present a different tool wear profile from that of single – phase steels of type ASTM 304L. It is recommended that a tougher insert grade is used than when machining austenitic stainless steels, e.g. Super Duplex S32760 Hexagon Nipple, where the cutting speeds must therefore be lower than that recommended for 304L.
Super Duplex Steel S32750 Nipple Manufacturer In India | Super Duplex Steel S32750 Nipple Manufacturer In Mumbai | Super Duplex Steel S32750 Nipple Exporter In India | Super Duplex Steel S32750 Nipple Exporter In Mumbai | Super Duplex Steel S32750 Nipple Supplier In India | Super Duplex Steel S32750 Nipple Supplier In Mumbai | Super Duplex Steel S32750 Nipple Stockist In India | Super Duplex Steel S32750 Nipple Stockist In Mumbai
The maximum temperature of Super Duplex S32750 One End Threaded Nipple for long periods of service: 280 Degree C (536 Degree F); with 300 Degree C / 572 Degree F possible for short periods. Heat this Super Duplex S32760 Both End Threaded Nipple for up to 1025 Degree C – 1120 Degree C ensuring sufficient time is allowed for the centre to achieve furnace temperature and hold for a time commensurate with the ruling section, followed by water quenching.
Super Duplex S32750 Concentric Swaged Nipple is readily weldable using many of the standard electric arc welding processes but oxyacetylene welding is not recommended because carbon pickup in the weld metal may occur. In addition, high resistance to crevice and stress corrosion coupled with the increased strength give Super Duplex S32760 Eccentric Swaged Nipple the advantage over the austenitic (300 series) and 22 % Cr duplex stainless steels.
Super Duplex Steel UNS S32750 / S32760 Nipple |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/4″ to 4″ |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
Super Duplex Steel S32750 / S32760 Nipple Chemical Composition
| S32750 / S32760 | C | N | P | Si | Mn | Mo | Ni | Cr | S | Other |
| 0.030 | 0.24/0.32 | 0.035 | 0.80 | 1.20 | 3.0/5.0 | 6.00/8.00 | 24.0/26.0 | 0.020 | Cu:0.50 |
Super Duplex Steel UNS S32750 / S32760 Nipple Mechanical Properties
| S32750 / S32760 | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
Equivalent Grades for UNS S32750 / S32760 Nipple
| STANDARD | UNS | WERKSTOFF NR. |
| Super Duplex S32750 | S32750 | 1.4410 |
| Super Duplex S32760 | S32760 | 1.4410 |
Super Duplex Steel UNS S32750 / S32760 Nipple Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Super Duplex Steel S32750 / S32760 Nipple Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Super Duplex Steel S32750 Nipple
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Super Duplex Steel S32750 Nipple, which has good weldability and post heat treatment of weld areas not required. Being a two – phase material (austenitic – ferritic) Super Duplex S32750 Hexagon Reducing Nipple will present a different tool wear profile from that of single – phase steels of type ASTM 304L. It is recommended that a tougher insert grade is used than when machining austenitic stainless steels, e.g. Super Duplex S32760 Hexagon Nipple, where the cutting speeds must therefore be lower than that recommended for 304L.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5