Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Threaded Forged Fittings, which display good resistance to scaling in continuous service up to 650 Degree C. Small sections of Stainless Steel 410 Forged Threaded Elbow can be air cooled and larger sections oil quenched for maximum through hardness. Pre hardened and tempered Stainless Steel 410 Forged Threaded Tee will also respond readily to nitriding achieving a typical surface hardness.
The nitriding process of Stainless Steel 410 Forged Threaded Cross however reduces the corrosion resistance and is therefore not generally recommended except for critical applications where the benefit outweighs all other considerations. Stainless Steel 410 Forged Threaded Cap is used for parts requiring a combination of good strength and toughness, plus reasonable corrosion resistance.
Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings | Stainless Steel 410 Threaded Forged Fittings
Use of Stainless Steel 410 Forged Threaded Fittings at higher working temperatures results in a substantial drop in tensile strength and hardness with subsequent increase in ductility. Stainless Steel 410 Forged Threaded Coupling is not recommended for use at sub – zero temperatures due to a substantial drop in impact properties consistent with most steels other than the austenitic steel types. In the hardened and tempered as supplied condition, Stainless Steel 410 Forged Threaded Union will be more difficult due to the high yield strength which must be taken into account.
Stainless Steel 410 Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 410 Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 11.50 – 13.50 | – | 0.75 max | – |
Stainless Steel 410 Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.8 g/cm3 | 1400 °C (2550 °F) | Psi – 65000 , MPa – 450 | Psi – 30000 , MPa – 205 | 20% |
Equivalent Grades for 410 Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | X12Cr13 |
Stainless Steel 410 Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
SS 410 Forged Threaded Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 410 Threaded Forged Fittings
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Threaded Forged Fittings, which display good resistance to scaling in continuous service up to 650 Degree C.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
