Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Socket Weld Fittings, which applies to both quench – annealed and welded material. In certain applications, e.g. suction rolls in paper mills, the resistance of Stainless Steel 347H Forged Socket Weld Elbow to corrosion fatigue has a crucial bearing on its service life. Laboratory tests have shown that Stainless Steel 347H Forged Socket Weld Tee has far better fatigue strength under corrosive conditions. The force requirement for bending is about twice as high for Stainless Steel 347H Forged Socket Weld Cap, but when the proof strength is exceeded, the plastic deformation takes place just as easily in austenitic stainless steels.
Stainless Steel 347H Socket Weld Fittings Manufacturer In India | Stainless Steel 347H Socket Weld Fittings Manufacturer In Mumbai | Stainless Steel 347H Socket Weld Fittings Exporter In India | Stainless Steel 347H Socket Weld Fittings Exporter In Mumbai | Stainless Steel 347H Socket Weld Fittings Supplier In India | Stainless Steel 347H Socket Weld Fittings Supplier In Mumbai | Stainless Steel 347H Socket Weld Fittings Stockist In India | Stainless Steel 347H Socket Weld Fittings Stockist In Mumbai
However, under service conditions where the risk of stress corrosion cracking starts to increase for example where the temperature of Stainless Steel 347H Forged Socket Weld Cross is nearly 150 Degree C (300 Degree F) in oxygen – bearing environment, and heat treatment is recommended even after moderate cold bending.
The mechanical machining of Stainless Steel 347H Forged Socket Weld Union always requires an adjustment of cutting data and machining method to give satisfactory results. When turning is undertaken with carbide – tipped tools, the cutting speed should be reduced by 20 % for finish machining and 60 % for rough machining compared to the cutting speeds applied for Stainless Steel 347H Forged Socket Weld Plug.
Stainless Steel 347H Forged Socket weld Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
SS 347H Forged Socket weld Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.04-0.10 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 17 – 19 | 8xC – 1.10 | 9 – 13 | 63.72 min |
Stainless Steel 347H Socket weld Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347H Stainless Steel Forged Socket weld Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4550 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
Stainless Steel 347H Forged Socket weld Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
SS 347H Forged Socket weld Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347H Socket Weld Fittings
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Socket Weld Fittings, which applies to both quench – annealed and welded material. In certain applications, e.g. suction rolls in paper mills, the resistance of Stainless Steel 347H Forged Socket Weld Elbow to corrosion fatigue has a crucial bearing on its service life
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5