Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 347 Pipe Fittings, where the layer is too thin to be visible, meaning the metal stays shiny. Also, when the surface of SS 347 Compression Pipe Fittings is scratched, this layer quickly reforms, which is, however, impervious to water and air, protecting the metal beneath. The purpose of Stainless Steel 347 Compression Fittings is to provide hard steel material highly resistant to stain, rust and corrosion and resistance. In principle, Stainless Steel 347 Ferrule Pipe Fittings is a melting, purifying, and alloying process carried out at approximately 1,600 Degree C (2,900 Degree F) in molten conditions.
Stainless Steel 347 Pipe Fittings Manufacturer In India | Stainless Steel 347 Pipe Fittings Manufacturer In Mumbai | Stainless Steel 347 Pipe Fittings Exporter In India | Stainless Steel 347 Pipe Fittings Exporter In Mumbai | Stainless Steel 347 Pipe Fittings Supplier In India | Stainless Steel 347 Pipe Fittings Supplier In Mumbai | Stainless Steel 347 Pipe Fittings Stockist In India | Stainless Steel 347 Pipe Fittings Stockist In Mumbai
In fact, Stainless Steel 347 Double Ferrule Pipe Fittings always has thermal effects on steelmaking — for example, the use of energy to heat and melt the alloying agents, or the heat of reaction or solution when they combine with other elements. Specifications for 347 Stainless Steel Compression Pipe Fittings as well as testing procedures are normally included in the general standard systems of most industrial countries.
Fortunately, there exists a large amount of empirical data of 347 SS Compression Fittings, obtained from thousands of thermodynamic experiments, that, when supported by theoretical principles, allows steelmakers to predict such temperature changes. Various chemical reactions are initiated for Stainless Steel 347 Accessories, either in sequence or simultaneously, in order to arrive at specified chemical compositions and temperatures.
Stainless Steel 347 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM A182 ASME SA 182 |
| Tube Size | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 347 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 347 | min. | – | – | – | – | – | 17.0 | – | 9.0 | – |
| max. | 0.08 | 2.0 | 1.0 | 0.040 | 0.030 | 20.0 | 13.0 | – | ||
Stainless Steel 347 Accessories Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 347 | 515 | 205 | 40 | 92 | 201 |
Equivalent Grades for 347 Stainless Steel Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 347 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 347 Pipe Fittings / Accessories Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 347 Pipe Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 347 Pipe Fittings, where the layer is too thin to be visible, meaning the metal stays shiny. Also, when the surface of SS 347 Compression Pipe Fittings is scratched, this layer quickly reforms, which is, however, impervious to water and air, protecting the metal beneath. The purpose of Stainless Steel 347 Compression Fittings is to provide hard steel material highly resistant to stain, rust and corrosion and resistance. In principle, Stainless Steel 347 Ferrule Pipe Fittings is a melting, purifying, and alloying process carried out at approximately 1,600 Degree C (2,900 Degree F) in molten conditions.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5