Sachiya Steel International is one of the prominent exporting houses of Stainless Steel 316TI Buttweld Fittings, which retains physical and mechanical properties similar to standard grades of 316. The main advantage of Stainless Steel 316Ti Elbow Butt Weld Pipe Fittings is that it can be held at higher temperatures for a longer period without sensitization (precipitation) occurring.
Stainless Steel 316Ti Reducer has good resistance to oxidation in intermittent service to 870 Degree C and in continuous service to 925 Degree C. However, continuous use at 425 Degree C – 860 Degree C is not recommended in Stainless Steel 316Ti Tee Butt Weld Pipe Fittings if corrosion resistance in water is required. Stainless Steel 316Ti Cross Butt Weld Pipe Fittings cannot be hardened by heat treatment.
Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings| Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings | Stainless Steel 316TI Buttweld Fittings
Solution treatment or annealing in Stainless Steel 316Ti Bends Butt Weld Pipe Fittings can be done by rapid cooling after heating to 1010 Degree C – 1120 Degree C. In this instance, Stainless Steel 316Ti Stub End is recommended due to its resistance to carbide precipitation. Where high strength is required at temperatures above 500 Degree C, Stainless Steel 316Ti End Cap is recommended. Stainless Steel 316Ti Dish Cap Butt Weld Pipe Fittings is readily brake or roll formed into a variety of parts. Stainless Steel 316Ti Lateral Tee Butt Weld Pipe Fittings is also suited to stamping, heading and drawing but post work annealing is recommended to relieve internal stresses.
Stainless Steel 316TI Pipe Fittings Specifications |
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
SS 316TI Pipe Fittings Chemical Composition
| Grade | C | Ni | Mn | P | S | Cr | Si | Mo | N |
| 316TI | 0.08 max | 10.00 – 14.00 | 2.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 0.75 max | 2.00 – 3.00 | – |
Stainless Steel 316TI Butt weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1399°C (2550°F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 316TI Stainless Steel Pipe Fitting
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| 316TI | 1.4571 | s31703 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
SS WERKSTOFF NR.1.4571 Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 316TI Buttweld Fitting Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 316TI Buttweld Fittings
Sachiya Steel International is one of the prominent exporting houses of Stainless Steel 316TI Buttweld Fittings, which retains physical and mechanical properties similar to standard grades of 316.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
