Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Round Bar, which have up to 8 percent alloying elements and any higher concentration is considered to constitute a high – alloy steel. Stainless Steel 310 Square Bars are manganese, silicon, aluminum, nickel, chromium, cobalt, molybdenum, vanadium, tungsten, titanium, niobium, where several of these are often added simultaneously to achieve specific properties. Stainless Steel 310S Flat Bars are made up for deep-drawn automobile bodies and appliances made of low – carbon steels, medium – carbon structural steels and plates employed in all kinds of construction, high – carbon railroad rails, and wires at all carbon levels used for hundreds of items.
The addition of costly Stainless Steel 310 Threaded Bars begins when combinations of properties are requested that cannot be met by carbon steels. The demand for high strength, good weldability, and higher resistance to atmospheric corrosion is met by Stainless Steel 310S Hollow Bars. New formulations of high – performance Stainless Steel 310 Hexagonal Bars enable carmakers to produce stronger and lighter vehicles that are more energy efficient.
Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar | Stainless Steel 310 Round Bar
Stainless Steel 310S Triangular Bars have low carbon levels and contain small amounts of one or a combination of elements such as chromium, nickel, molybdenum, vanadium, titanium, and niobium. Stainless Steel 310 Bars offers considerable advantages for the construction of wind turbine towers due to its strength and durability.
SS 310/310S Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 310/310S Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 310/310S Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 310/310S Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 310/310S Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 310/310S Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
310/310S Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310 | 0.015 max | 2 max | 0.15 max | 0.20 max | 0.015 max | 24-26 | 0.15 max | 19-21 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 24 – 26 | 0.75 max | 19 – 21 | 53.095 min |
Stainless Steel 310/310S Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310/310S Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
310/310S Steel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 310 Round Bar
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Round Bar, which have up to 8 percent alloying elements and any higher concentration is considered to constitute a high – alloy steel.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
