Sachiya Steel International is one of the reputed producers and wholesaler of Stainless Steel 304L Buttweld Fittings, which can get marked up by fingerprints and grease, develop discoloration, and eventually rust. Stainless Steel 304L Pipe Fittings is austenitic steel possessing a minimum of 18 % chromium and 8 % nickel, combined with a maximum of 0.08 % carbon. Stainless Steel 304L Elbow is nonmagnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.
As a result, Stainless Steel 304L Tee Pipe Fittings can be used in as – welded condition, even in severe corrosive conditions. Stainless Steel 304L Reducer often eliminates the necessity of annealing weldments except for applications specifying stress relief. Stainless Steel 304L Long Stub End Pipe Fittings has slightly lower mechanical properties than Type 304. Stainless Steel 304L End Cap Pipe Fittings is non – hardenable by heat treatment, where annealing of heat is done up to 1900 Degree F – 2050 Degree F (1038 Degree C – 1121 Degree C), then cool rapidly.
Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings
Thin strip sections of Stainless Steel 304L Dish Cap Pipe Fittings may be air cooled, but heavy sections should be water quenched to minimize exposure in the carbide precipitation region. Stainless Steel 304L Short Stub End Pipe Fittings has very good drawability, which can withstand much more time and abuse before showing signs of wear.
Stainless Steel 304L Pipe Fittings Specifications |
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
SS 304L Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 304L | min. | – | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.030 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 12.0 | 0.10 | ||
Stainless Steel 304L Buttweld Fittings Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 304L | 485 | 170 | 40 | 92 | 201 |
Equivalent Grades for 304L Stainless Steel Pipe Fitting
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 304L | S30403 | 304S31 | 58E | 1.4301 | X5CrNi18-10 | 2332 | SUS 304 |
SS 304L Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 304L Buttweld Fitting Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 304L Buttweld Fittings
Sachiya Steel International is one of the reputed producers and wholesaler of Stainless Steel 304L Buttweld Fittings, which can get marked up by fingerprints and grease
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
