Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tube to Union Fittings similar to parker and Swagelok to the valued customers. With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both. Nickel 200 Tube Fittings is ferromagnetic and has relatively low electrical resistivity. Nickel 200 Ferrule Fittings is used in caustic solutions, food handling equipment, and general corrosion – resistant parts and structures.
Nickel Alloy 200 Tube to Union Fittings Manufacturer In India | Nickel Alloy 200 Tube to Union Fittings Manufacturer In Mumbai | Nickel Alloy 200 Tube to Union Fittings Exporter In India | Nickel Alloy 200 Tube to Union Fittings Exporter In Mumbai | Nickel Alloy 200 Tube to Union Fittings Supplier In India | Nickel Alloy 200 Tube to Union Fittings Supplier In Mumbai | Nickel Alloy 200 Tube to Union Fittings Stockist In India | Nickel Alloy 200 Tube to Union Fittings Stockist In Mumbai
Nickel 200 Double Ferrule Fittings has a low annealed hardness and very low work – hardening rate. Meanwhile, these Nickel 200 Union Fittings are also being offered in different sizes and shapes to our customers. With its high metal content, Alloy 200 Compression Fittings unsullied offers smart corrosion resistance to extend warmth properties. Alloy 200 Tube Fittings is utilized for easy fabrication, and could be a high carbon modification developed for increased creep resistance.
In most instances the grain size and carbon content of Alloy 200 Union Tube Fittings will meet each of the character necessities. Alloy 200 Ferrule Fittings is commonly used at refrigerant temperatures, with wonderful toughness to -450 Degree F, and low magnetic permeableness. For optimum corrosion performance in Alloy 200 Double Ferrule Fittings, therefore, the re – annealing of cold worked parts (following an outer fiber elongation of 7 % or more) is important.
Nickel Alloy 200 Tube to Union Specifications |
||
| Standards | : | ASTM B366 / ASME SB366 |
| Size Range | : | 1/16″OD to 2″OD, 2mm OD to 50mm OD |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| End | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
High Nickel Alloy 200 Tube To Union Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel Alloy 200 Tube To Union Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 200 Nickel Alloy Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
High Nickel Alloy 200 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Nickel Alloy 200 Tube To Union Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 200 Tube to Union Fittings
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tube to Union Fittings similar to parker and Swagelok to the valued customers. With Nickel 200 Compression Fittings (UNS N02200), the restrictions are combined into a single dual chemistry which results in a single alloy with the best characteristics of both. Nickel 200 Tube Fittings is ferromagnetic and has relatively low electrical resistivity. Nickel 200 Ferrule Fittings is used in caustic solutions, food handling equipment, and general corrosion – resistant parts and structures.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5