Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel K500 Tube to Female Pipes similar to parker and Swagelok, where we are catering our services to many Industries. Monel K500 Tube Fittings has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking. Resistance to sulphuric acid is particularly exceptional but Monel K500 Compression Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Monel K500 Female Connector Fittings has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.
Monel K500 Tube to Female Pipes Manufacturer In India | Monel K500 Tube to Female Pipes Manufacturer In Mumbai | Monel K500 Tube to Female Pipes Exporter In India | Monel K500 Tube to Female Pipes Exporter In Mumbai | Monel K500 Tube to Female Pipes Supplier In India | Monel K500 Tube to Female Pipes Stockist In India | Monel K500 Tube to Female Pipes Stockist In Mumbai
Monel K500 Ferrule Tube Fittings also contains niobium for stabilization against sensitization and resultants inter – granular corrosion. At 33 % nickel, Monel K500 Double Ferrule Tube Fittings has practical immunity to chloride stress corrosion cracking. Monel K500 Compression Tube Fittings is often chosen to solve SCC problems, which may occur with 316L stainless.
Alloy K500 Female Connector Fittings can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps. Alloy K500 Ferrule Tube Fittings was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid. These Alloy K500 Double Ferrule Tube Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.
Monel K500 Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
K500 Monel Alloy Tube to Female Pipes Fitting Chemical Composition
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
| 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
Monel Alloy K500 Tube to Female Pipes Fitting Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 1,60,000 , MPa – 1100 | 20 % |
Equivalent Grades for K500 Monel Tube to Female Pipes Fitting
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
Monel Alloy K500 Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Monel K500 Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel K500 Tube to Female Pipes
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Monel K500 Tube to Female Pipes similar to parker and Swagelok, where we are catering our services to many Industries. Monel K500 Tube Fittings has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking. Resistance to sulphuric acid is particularly exceptional but Monel K500 Compression Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Monel K500 Female Connector Fittings has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5