Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 600 Tube to Female Pipes similar to parker and Swagelok, which can be formed both ways i.e. cold – formed and hot – formed by different processes. Inconel 600 Tube Fittings is a superior choice for chemical processing equipment, heat treating muffles and retorts. Inconel 600 Compression Fittings is used in chemical processing, food processing, phenol condensers, heat treating, soap manufacture, vegetable vessel, fatty acid vessels, and so on. Above this temperature in Inconel 600 Female Connector Fittings, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth.
Inconel 600 Tube to Female Pipes Manufacturer In India | Inconel 600 Tube to Female Pipes Manufacturer In Mumbai | Inconel 600 Tube to Female Pipes Exporter In India | Inconel 600 Tube to Female Pipes Exporter In Mumbai | Inconel 600 Tube to Female Pipes Supplier In India | Inconel 600 Tube to Female Pipes Supplier In Mumbai | Inconel 600 Tube to Female Pipes Stockist In India | Inconel 600 Tube to Female Pipes Stockist In Mumbai
Typical of other nickel alloys, heavy – duty equipment in Inconel 600 Ferrule Fittings should be used along with sharp tooling and more than adequate cooling. Inconel 600 Double Ferrule Fittings is also used in evaporator tubes, flaking trays and tube sheets for the manufacture of sodium sulfide. Typical applications of Inconel 600 Compression Tube Fittings include the chemical, aerospace, pulp and paper, heat treating and nuclear engineering industries.
Alloy 600 Tube Fittings is as well used in springs, lock wire, seals, reactor vessels, fixtures machinery, process equipment, furnace seals fans. Alloy 600 Compression Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, high strength at high temperatures and good oxidation resistance. Alloy 600 Female Connector Fittings basically offers good oxidation and corrosion resistance at a very high temperature range.
Inconel 600 Tube to Female Pipes Specifications |
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
600 Inconel Alloy Tube to Female Pipes Fitting Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
Inconel Alloy 600 Tube to Female Pipes Fitting Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 600 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
Equivalent Grades for 600 Inconel Tube to Female Pipes Fitting
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
Inconel Alloy 600 Tube to Female Pipes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Inconel 600 Tube to Female Pipes Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel 600 Tube to Female Pipes
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 600 Tube to Female Pipes similar to parker and Swagelok, which can be formed both ways i.e. cold – formed and hot – formed by different processes. Inconel 600 Tube Fittings is a superior choice for chemical processing equipment, heat treating muffles and retorts. Inconel 600 Compression Fittings is used in chemical processing, food processing, phenol condensers, heat treating, soap manufacture, vegetable vessel, fatty acid vessels, and so on. Above this temperature in Inconel 600 Female Connector Fittings, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5