Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 600 Round Bars, which is a standard engineering material used for various purposes in the heat – treating industry. Inconel 600 Square Bars shows high levels of resistance to stress – corrosion cracking, exhaust gases, corrosion by high purity water, atmospheric corrosion, halogen, and most organic acids and inorganic acids. These Inconel 600 Flat Bars can also be hardened and strengthened through cold work. Inconel 600 Threaded Bars has lower rate of attack from chlorine or hydrogen chloride. A minimum treatment of 1650 Degree F for one hour is suggested in these Inconel 600 Hollow Bars, but 1800 Degree F – 1850 Degree F for one hour preferred.
Inconel 600 Hexagonal Bars exhibits cold forming characteristics normally associated with chromium – nickel stainless steels. These Inconel 600 Triangular Bars is not an age hardening alloy, where cold working is the only available means of hardening. Welding Inconel 600 Bars can be achieved via shielded metal – arc welding using AWS ENiCrFe-3 electrode. These Inconel 600 Rods is used extensively in the chemical industry for its strength and corrosion resistance.
Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars | Inconel 600 Round Bars
Alloy 600 Square Bars also provides excellent resistance to alkaline solutions and has very good corrosion resistance. These Alloy 600 Flat Bars is a nickel – chromium – iron alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress corrosion cracking corrosion by high – purity water, and caustic corrosion.
Inconel 600 Round Bar Specifications |
||
| Specifications | : | ASTM B166 / ASTM SB166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
600 Inconel Round Bar Chemical Composition
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 600 | 0.15 max | 1 max | 0.50 max | 0.50 max | 0.15 min | 6.0-10.0 | – | 72 min | 14.0–17.0 |
Inconel Alloy 600 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Equivalent Grades for 600 Inconel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Inconel 600 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
600 Inconel Rods Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel 600 Round Bars
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 600 Round Bars, which is a standard engineering material used for various purposes in the heat – treating industry.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
