Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy X Socket Weld Fittings, which represent the average of six or less tests unless otherwise noted. All wrought forms of Hastelloy X Forged Socket Weld Elbow Fittings are furnished in the solution heat – treated condition unless otherwise specified. The standard heat – treatment of Hastelloy X Forged Socket Weld Tee Fittings is at a temperature of 2150 Degree F (1177 Degree C) followed by rapid cooling. Other heat – treatment temperatures of Hastelloy X Forged Socket Weld Cap Fittings also may be effective for certain forms and conditions.
Hastelloy X Socket Weld Fittings Manufacturer In India | Hastelloy X Socket Weld Fittings Manufacturer In Mumbai | Hastelloy X Socket Weld Fittings Exporter In India | Hastelloy X Socket Weld Fittings Exporter In Mumbai | Hastelloy X Socket Weld Fittings Supplier In India | Hastelloy X Socket Weld Fittings Supplier In Mumbai | Hastelloy X Socket Weld Fittings Stockist In India | Hastelloy X Socket Weld Fittings Stockist In Mumbai
The properties of Hastelloy X Forged Socket Weld Coupling Fittings are average values based on laboratory test conducted by the manufacturer. Care must be taken for Hastelloy X Forged Socket Weld Cross Fittings to make sure there are rigid machine setup and sharp tools, so that work hardening and surface glazing do not occur. Hastelloy X Forged Socket Weld Union Fittings is machinable in both the wrought and cast form, where low cutting speeds and an ample flow of coolant are required.
High – speed steel drills in Hastelloy X Forged Socket Weld Plug Fittings should be ground to an included angle of 135 Degree C to 140 Degree C with a clearance angle of 10 degrees C. Hastelloy X Forged Socket Weld Lateral Tee Fittings is designed as an improved version in several these applications.
Hastelloy X Forged Socket weld Fittings Specifications |
||
| Specifications | : | ASTM B564 & ASME B564 |
| Size | : | 1/8” NB to 4” NB |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
Hastelloy Alloy X Forged Socket weld Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Co | Mo | Ni | Fe | Cr |
| Hastelloy X | 0.05 – 0.15 | 1.00 max | 1.00 max | 0.04 max | 0.03 max | 0.50 – 2.50 | 8.00-10.00 | Balance | 17.00 – 20.00 | 20.50-23.00 |
Hastelloy Alloy X Socket weld Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.22 g/cm³ | 1355°C | 655 MPa | 240 MPa | 35 % |
Equivalent Grades for X Hastelloy Alloy Forged Socket weld Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Hastelloy X | 2.4617 | N10665 | – | – | – | – | – |
Hastelloy X Forged Socket weld Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Hastelloy Alloy X Forged Socket weld Fittings Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)