Sachiya Steel International is one of the prominent Manufacture and Exporter for high quality Brass Buttweld Fittings, which is the most widely used stainless steel grade. Brass Elbow Butt Weld Pipe Fittings finds applications due to both excellent corrosion resistance and high strength. Brass Tee Butt Weld Pipe Fittings gives better guaranteed corrosion resistance, but for much of the stainless steel currently produced also complies with other alloys.
Brass Elbow Reducer Butt Weld Pipe Fittings is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition. Brass Cross Butt Weld Pipe Fittings has excellent general corrosion resistance; superior to Grade 316 in most environments. Brass Bend Pipe Fittings has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion; the CPT of it is generally at least 35 Degree C.
Brass Buttweld Fittings | Brass Buttweld Fittings | Brass Buttweld Fittings | Brass Buttweld Fittings | Brass Buttweld Fittings | Brass Buttweld Fittings
Brass Stub End Butt Weld Pipe Fittings is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Brass End Cap Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Brass Dish Cap Butt Weld Pipe Fittings has better resistance to sea water then Grade 316, where the high strength of can pose problems.
Brass Pipe Fittings Specifications |
||
| Specifications | : | ASTM B62 / ASME SB62 |
| Size | : | Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″ |
| Standards |
: | ASME/ANSI B16.15, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
Brass Buttweld Fittings Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Buttweld Fittings Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modulas of Elasticity in Tension | 14000 ksi |
Brass Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Buttweld Fitting Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Buttweld Fittings
Sachiya Steel International is one of the prominent Manufacture and Exporter for high quality Brass Buttweld Fittings, which is the most widely used stainless steel grade.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
