ASTM A53 GR. B Carbon Steel Pipe Manufacture

ASTM A53 GR. B Carbon Steel Pipe

Sachiya Steel International is one of the pioneers in supplying and manufacturing of ASTM A53 GR. B Carbon Steel Pipe, where it is important to keep temperatures above 1750 Degree F to prevent the formation of sigma phase. Another consequence of the spindle decomposition of the ferrite phase in ASTM A53 GR. B Carbon Steel Seamless Pipes is loss of corrosion resistance. Because this reaction occurs more rapidly at 475 Degree C in ASME SA 53 GR. B Carbon Steel Welded Pipes, this process is also known as “475 Degree C embrittlement”.

However this phase separation may also occur in temperatures as low as 300 Degree C in exposures after thousands of hours or at 600 Degree C in exposures for few minutes, depending on the chemical composition of ASTM A53 GR. B Carbon Steel ERW Pipes.

ASTM A53 GR. B Carbon Steel Pipe | ASTM A53 GR. B Carbon Steel Pipe | ASTM A53 GR. B Carbon Steel Pipe | ASTM A53 GR. B Carbon Steel Pipe | ASTM A53 GR. B Carbon Steel Pipe

Sachiya Steel International is one of the well-known trader and seller of ASME SA 53 GR. B Carbon Steel EFW Pipes, which is suggested to maintain high hot working temperatures. The deformation resistance in ASTM A53 GR. B Carbon Steel Round Pipes increases with decreasing temperature due to decreasing ferrite as temperature drops. At forging temperatures, the mechanical strength of ASME SA 53 GR. B Carbon Steel Square Pipes is less than an austenitic. Hot working temperatures for ASTM A53 GR. B Carbon Steel Rectangular Pipes are 1750 Degree F – 2230 Degree F (950 Degree C – 1220 Degree C).

ASTM A53 Gr.B Pipes Chemical Composition

ASTM A53 Gr.B Pipe Mechanical Properties

CS A53 Pipes Application Industries

• Off-Shore Oil Drilling Companies
• Power Generation
• Petrochemicals
• Gas Processing
• Specialty Chemicals
• Pharmaceuticals
• Pharmaceutical Equipment
• Chemical Equipment
• Sea Water Equipment
• Heat Exchangers
• Condensers
• Pulp and Paper Industry

Carbon Steel A53 Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

ASTM A53 GR. B Carbon Steel Pipe

Sachiya Steel International is one of the pioneers in supplying and manufacturing of ASTM A53 GR. B Carbon Steel Pipe, where it is important to keep temperatures above 1750 Degree F to prevent the formation of sigma phase.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5