Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Beam And Other Products, which are often used in Chemical process vessels and Catalytic cracking units. The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut. A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.
Incoloy 825 Beam Manufacturer In India| Incoloy 825 Beam Manufacturer In Mumbai | Incoloy 825 Beam Exporter In India | Incoloy 825 Beam Exporter In Mumbai | Incoloy 825 Beam Supplier In India | Incoloy 825 Beam Supplier In Mumbai | Incoloy 825 Beam Stockist In India | Incoloy 825 Beam Stockist In Mumbai
Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process. For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use. The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres. This Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.
The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges. A nickel – iron – chromium alloy with additions of molybdenum and copper, this Alloy 825 C-Channel has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localize attack such as pitting and crevice corrosion.
Incoloy 825 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B425 / ASME B425 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Incoloy 825 Angle |
: | 5mm to 9mm |
| Incoloy 825 Channel |
: | 40mm*20mm~300mm*300mm |
| Incoloy 825 Beam | : | 3″ thru 12.31″ |
| Incoloy 825 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
825 Incoloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe | Ti |
| Incoloy 800 | 0.05 max | 1.00 max | 0.05 max | 0.02 max | 0.03 max | 19.50-23.50 | 1.50-3.00 | 38.0-46.0 | 22.0 min | 0.06 – 1.20 |
Incoloy 825 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30% |
Equivalent Grades for 825 Incoloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
825 Incoloy Angle, Channel, Beam, Chain Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Incoloy 825 Beam
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Incoloy 825 Beam And Other Products, which are often used in Chemical process vessels and Catalytic cracking units. The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5